![]() Plus as well as USB-A, you also get USB-C connectivity. It also offers higher accuracy in dark colours thanks to it use of black current subtraction technology. While the company's other monitor calibrators are suitable for displays up to 1,000 nits, this one can accurately measure luminance/brightness levels up to 2000 nits. It's specifically aimed at professional filmmakers, editors, colourists and photographers using super-bright HD and HDR monitors. The ColorChecker Display Plus is Calibrite's top-of-the-range model, and as such the most expensive. For more information, see our full Datacolor SpyderX Elite review. There's no doubt that the SpyderX Elite is an excellent monitor calibration tool, but we'd only recommend it over the SpyderX Pro if you specifically need to calibrate your monitor to suit video color spaces, or want complete control over every element of the calibration process. Both versions maintain excellent calibration accuracy scores with negligible Delta-E variation. ![]() Given that they use the same hardware, it’s no surprise that the Elite manages a very similar sub-two-minute calibration time to the SpyderX Pro. The most valuable is arguably the ability to calibrate your monitor not just to conform to a typical 2.2 gamma and 6500 K white point, but also to color space standards like sRGB, Adobe RGB, NTSC and Rec 709. The Elite version of the SpyderX colorimeter may look identical to its cheaper Pro sibling (above), but fire up the Elite’s software and you get a host of extra features. ![]() Whichever version you opt for, Datacolor’s calibration software is easy to use, yet includes plenty of customization to suit lots of monitor types.Įxtras aren’t essential if you just want to calibrate and go The Elite (number four on our list) adds projector profiling, pro-orientated advanced calibration options, and its video color space targets are useful for video editing, but for most photographers we reckon the Pro edition offers the best bang per buck. ![]() Given monitor calibration isn't a once-only procedure (you should calibration roughly once a month to ensure consistent color accuracy), such a noticeable time saving is very handy indeed.Īvailable in Pro and Elite flavors, both SpyderX versions offer features like ambient light monitoring and multi-monitor support. In our hands the Spyder X Pro calibrated our test monitor in a staggering 1 minute 15 seconds. The result is a claimed increase in calibration accuracy, especially in the lightest and darkest image regions, and a sub-2-minute calibration time, making this the fastest Spyder calibrator ever. It uses a brand new lens-based sensor system rather than the old honeycomb baffle on the Spyder5. However, where possible you should use a stand alone program since I've only checked it on Windows 7 and 10.SpyderX is the successor to Datacolor’s popular Spyder5 monitor calibrator series. I find it useful for printing specialized charts on small targets like 4圆's where I don't have a standard size paper. It is exactly the same as one of the stand alone chart printers. You assign the target the same profile as the printer then print using the same profile and intent settings.īeing cautious, I measured the results out of fear Photoshop did a round-trip which would introduce some error. While direct to printer is no longer supported in Photoshop, apparently because of issues with IOS, there is a work around for Windows. The thing to pay attention to, and I can't stress it enough, is printing the chart with all colour management off. You are going to profile an "RGB" printer (even though there really is no such thing they take RGB level inputs) Generally, when first starting out you should make small patch size profiles where the patch targets are all on one page or you can easily get frustrated and give up. If you don't have you will have to make something (hard) or perhaps find one used. What other stuff do you have with the I1? You will need the old slider ruler which looks like a transparent plastic ruler with a slot for the spectro head. Where unfortunately the chapter about profiling is not written yet. What I am looking for in is the style of this page: Does anybody know of a place with simple instructions for ArgyllCMS ? Using displa圜AL would be okay as well but I'm comfortable working with command line. The instrument is an old Gretag Macbeth I1 spectrometer (without UV cut-off).īut the purpose I am after is to calibrate profiles for my all new printer (Epson P800). I've recently downloaded ArgyllCMS and displa圜AL and created with them a monitor profile.
0 Comments
Leave a Reply. |